Go titanium. All the way to the hub.
The visible nuts are only half the story. Club Sports brings matching titanium studs into the build, replacing the original press-in hardware while retaining the vehicle’s stud-and-nut layout.
Built into the detail
Choose the nut design that suits your wheels and match the spline diameter to the hub. The result is a coordinated set with attention paid to the details you see—and the ones you know are there.
Product specifications
- Nut Thread: M12 x P1.5
- Stud Bolt Thread: M12×P1.5
- Spline Diameter : 14.3 mm
- Overall length: Nut:25 mm / Stud Bolt:75 mm
- Seat: Conical
- Drive: 17 mm HEX, PENTAGON or TORX
- Reference weight per part: Nut 16 g(0.56oz) / Stud Bolt 34 g(1.19oz)
- Finish: Natural
The material behind the detail
Grade 5 Ti-6Al-4V titanium alloy. Material reference values: density approximately 4.43 g/cm³; yield strength 890 MPa (129 KSI); tensile strength 970 MPa (141 KSI); shear strength 560 MPa (81 KSI). These figures describe the alloy, not the tested strength of this finished fastener.
In the box
- Set of 20 (20×nuts + 20×studs) with the nut installation tool.
Get the fit right
Match the thread, seat profile and required length to your vehicle and wheels. Check clearance and thread engagement, including any spacers. Wheel brand or vehicle model alone does not confirm fitment. Follow the installation instructions for your exact specification.
Professional installation using a hydraulic press is recommended. Confirm the hub spline fit before pressing in the studs.
Take the build further
Shop Stud Conversion · Shop Custom Kits · Shop TPMS Bodies · Check your fitment
