Great wheels deserve better hardware.
You chose the wheels for a reason. Carry that standard through to the bolts. BE ZERO pairs the character of titanium with a distinctive two-piece design that makes the hardware part of the look.
Built into the detail
The separate sleeve washer is designed to reduce rubbing at the wheel seat during tightening. Select the length and seat profile your setup requires, then let the details speak for themselves.
Product specifications
- Thread: M12x1.5
- Under-head length: 28 mm / 40 mm; custom cut 29–39 mm in 1 mm increments
- Outside diameter: 27 mm
- Seat: Conical
- Drive: Dedicated tool
- Reference weight per bolt: 38 g (varies with specification)
- Finish: ZERO Titanium
The material behind the detail
Grade 5 Ti-6Al-4V titanium alloy. Material reference values: density approximately 4.43 g/cm³; yield strength 890 MPa (129 KSI); tensile strength 970 MPa (141 KSI); shear strength 560 MPa (81 KSI). These figures describe the alloy, not the tested strength of this finished fastener.
In the box
- Set of 20
- Dedicated tools and copper grease included.
Get the fit right
Match the thread, seat profile and required length to your vehicle and wheels. Check clearance and thread engagement, including any spacers. Wheel brand or vehicle model alone does not confirm fitment. Follow the installation instructions for your exact specification.
Custom-cut lengths are made to order. Under-head length is not the same as effective thread engagement. Contact us for production timing before ordering a custom specification.
Take the build further
Shop Stud Conversion · Shop Custom Kits · Shop TPMS Bodies · Check your fitment
